 |
|
|
 |
The benefits offered by steel roof trusses are now well recognized
in the building industry. Reduced on-site labour, rapid erection
and the virtual elimination of call back maintenance have resulted
in an increasing use of light weight steel trusses in Malaysia.
Functionality and cost effectiveness are twoi key objectives
in today's building construction. With such high specfications,
we are introducing you our improved version of
K-Steel™ NEWSTRUSS SYSTEM. With this system
we offer you a total steel roof solution in terms of supply,
design, fabrication and erection.
| Engineering
& Design Department |
|
|
Advance
planning can save time, cozt and result in a better
appearing job. Using K-Steel™
NEWTRUSS SYSTEM we can do all of that.
K-Steel™ NEWTRUSS SYSTEM is created by qualified
and experienced steel structural design engineers
using the latest engineering softwares that adhere
to up to date edition of British standard or equivalent.
Our design department is able to produce design
with fabrication detail, truss analysis and material
list. This system can minimize the wastage of material
that can result unsafely environmenrt at job site.
Minimal wastage means minimizing the cozt of steel
material. |
|
Fabrication Department |
|
|
Prefabricated
roof trusses can offer the builder several signifcant
advantages. The prefabricated roof trusses are fabricated
inside the factory under a controlled environment
where work can proceed regardless of weather conditions.
The truss fabrication is easier and faster with
the trusses laid down in horizontal position. Trusses
are assembled in one place by an experienced crew
working with the right equipment under controlled
condition make the quality og the trusses better.
Every trusses alos will be inspected before delivery
to job site. The major benefit to prefabricated
trusses system is speed of the erection. The installation
of our K-Steel™ NEWTRUSS
SYSTEM is 4 times faster compared with
on-site fabrication and erection. The overall time
& costs saving will be even greater. |
|
Installation Department |
|
|
Erection
of steel trusses at site is made simple and faster
with this prefabricated roof truss system. K-Steel™
NEWTRUSS SYSTEM prefabricated trusses
are easier to handle and hassle free, what more
they are clearly labeled and ready to be assembled
eith direction given by trusses Layout plan and
they will minimize any human error at site. The
system comes with shop drawings, supervisions and
the design is being endorsed by a professional engineer.
To alleviate your problem, we also provide our accredited
installer to contruct your roof trusses. |
|
Manufacture's Steel Truss |
Choice of Material
K-Steel™ NEWTRUSS
SYSTEMis designed to the British standard
or equivalent, comprising of steel components manufactured
from BHP G550 high-tensile Zincalume® steel
material or CGI Steel complying to japanese JIS
G3302-SGCH (Z22). Both under the correct application
will resist corrosion and preserves qualityof the
material over time giving a minimum service life
of 50 years, subject to the compliance of the relevant
building codes and accepted good building practice.
All K-Steel™ NEWTRUSS
SYSTEM components are of high-tensile
steel with minimum yield strength of 450mpa. The
material has been certified as non-combustible and
has achieved Kelas 'O' as in accrodance to AS1530
Part 1&2 by Bomba.
Machine
We are synergized locally. The design engineering
and specially made roll-forming machine is customized
to suit local and other regions requirement using0.60mm
- 2.00mm thick Zincalume® or galvanized high-tensile
steel, rolled or formed into studs, roof trusses,
battens or purlins and fabricated in a controlled
factory environment, ensuring a finished product
complying to engineering standards. |
Accessories
|
|
|
|
|
Adjustable
Fascia Bracket
|
Triangle
Grip
|
Fascia
Board
|
|
|
|
|
|
Apex
Plate
|
Adjustable
Fascia Bracket
|
Hip
Bracket
|
|
|
|
|
 |
|
